What to Use to Clean Cabinets Before Painting

Matt is a professional painter and freelance writer, sharing his knowledge, house-painting tips, and product reviews.

Cleaning Cabinets Before Painting

When you prep your kitchen cabinets for paint, don't skip the cleaning, even if your cabinets look clean. Kitchen cabinets get really dirty from cooking and touching the doors and drawers. Grease and food particles end up on the surface, and all of these things can cause paint problems, especially grease. Never paint over grease.

Cabinets near a garbage can, above the stove, or below the sink, are usually the dirtiest because those areas take a lot of abuse. If you boil and fry food often, I guarantee the doors above the stove are sticky to the touch from grease.

What Happens When You Paint Over Grease?

Paint doesn't stick to grease, at least long term. If you paint over grease, the paint is likely to crack and peel because it's unable to form a bond with the wood underneath. Cooking grease is oily too and most water-based paints won't stick to it, which can lead to fish-eye and other problems while painting. Cooking grease can also bleed through paint and leave noticeable stains in your finish. The stains show through paint as brown spots.

Choose the Right Cleaner for Your Cabinets

Finding the right cleaner is confusing when you visit the store and see twenty different options on the shelf. If your cabinets are covered in cooking grease, use a heavy duty de-greaser to make the cleaning faster and more effective. Some surface cleaners are too mild and do nothing to break down and remove heavy grease.

My Favorite Cleaner for Cabinet Painting

The best degreaser for kitchen cabinets that I use on my painting projects is Krud Kutter Orginal in the spray bottle. I used Krud Kutter to clean cabinets once that were covered in layers of nasty grease. The doors were so greasy that I had to wear gloves when handling them. Although I had to reapply the cleaner several times and scrub with stripping pads, it removed all of the grease and restored the surface. The paint finish turned out flawless without any contamination problems. I definitely recommend that cleaner if you're dealing with a lot of grease and grime.

Read More From Dengarden

If your cabinets aren't super greasy, Dirtex powder cleaner works great too for removing dirt and other contaminants. Dirtex works on grease, but not heavy grease. I prefer it over TSP because it doesn't require rinsing, although I always rinse anyway. The cleaner is inexpensive and a good paint prep cleaner for wood.

Cleaning Painted and Unpainted Cabinets

Don't clean your cabinet doors without detaching them from the frame first. The doors and drawer fronts should be removed for painting anyway, and the cleaning is easier from a work table than climbing up and down a ladder. Use a drill to detach the hinges from the doors and frames. Bag up the screws and label each door so you know exactly where they go at the end of the project.

• Protect the floor and countertops. Don't ruin your floor. Drips from chemical cleaners can eat through the finish on your floor and cause permanent damage. Clean the doors outside if possible. Before cleaning the frames, cover the floors with a leak-proof floor protector, not canvas drop cloths, or rosin paper. Liquids can leak through both. Protect the countertops and appliances too.
• Clean the cabinets before sanding. Sanding greasy and dirty cabinets spreads contaminants all over the surface and ruins the sandpaper. On wood with an open grain, such as oak, sanding before cleaning can force grease into the grain holes that's difficult to remove.
• Use the appropriate cleaner. The two cleaners I recommended in the beginning of the article are both good options, but if the cabinets are unpainted and really greasy, use Krud Kutter Original over Dirtex. A commercial strength cleaner is needed to remove layers of accumulated grease. I would be hesitant using a strong cleaner like Krud Kutter on painted cabinets because it could loosen the existing paint you're painting over.
• Scrub the cabinets with a drill brush attachment. Scrubbing by hand is tiring when you have to reapply cleaner multiple times on dozens of doors. You can buy drill brush attachments online and at most home improvement stores. Brush attachments make cleaning so much easier. You can usually buy a set that includes different sizes. If you don't have a drill, Scotch-Brite pads work great, or stripping pads.
• Always rinse with clean water. Some cleaners are advertised as "no rinse", and while that sounds nice, not rinsing is a bad idea when you're cleaning dirty cabinets for a paint job. Rinsing with clean water is important for removing any remaining dirt and residue. I use a separate cleaning pad for rinsing only. I also change the water and wash off the cleaning pad multiple times.

How to Clean Painted Kitchen Cabinets

What if the cabinets are already painted? Maybe you're repainting them a different color, or the paint job is worn and needs a re-coat. The cleaning process is the same for painted cabinets, but use caution when choosing a de-greaser because a strong cleaning solution can actually loosen the existing paint and create a huge mess. You want to keep the original paint in tact.

Don't use TSP, or Krud Kutter, to clean painted cabinets. Both cleaners are too abrasive for that. Cleaning painted cabinets with Dawn dish soap is one of the best ways to remove dirt and grease without compromising the paint. To avoid scratching the finish, use a microfiber cloth and scrub lightly. Dawn soap works great as a paint prep cleaner. I've used Dawn multiple times to clean cabinets before painting.

This content is accurate and true to the best of the author's knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.

© 2021 Matt G.

What to Use to Clean Cabinets Before Painting

Source: https://dengarden.com/home-improvement/How-to-Clean-Kitchen-Cabinets-Before-Painting

Share this post